欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2025, Vol. 41 ›› Issue (05): 147-150,155.

• 矿物加工工程 • 上一篇    下一篇

研山铁矿磨选工艺流程考察及诊断分析

邓玉芬 王海霞 田彦纯   

  1. 河北钢铁集团司家营研山铁矿有限公司
  • 出版日期:2025-05-25 发布日期:2025-07-30

Process Investigation and Diagnostic Analysis of Grinding and Separation Process in Yanshan Iron Mine

  1. Sijiaying Yanshan Iron Mine Co.,Ltd.,Hebei Iron and Steel Group
  • Online:2025-05-25 Published:2025-07-30

摘要: 为检验研山铁矿 3# 系列全粒级湿式预选工艺改造完成后处理贫磁铁矿时磨选工艺的 运行效果,对其进行了全流程考察及分析。通过化学成分、铁物相及粒级筛析等方法,分析了给矿矿 石性质、各工序的矿物种类及含量、单体解离度及流程中有用矿物、脉石矿物及金属的流失走向,综 合分析诊断了各工序的运行状况。从整体工艺流程运行效果来看,3# 系列生产状态正常,精矿产量、 质量指标基本达到设计要求;但淘洗机溢流经扫选精矿返回原流程后,会造成循环量增大、一段旋流 器分级效率较低及反富集等问题,技术经济指标有进一步提升的空间。

关键词: 磁铁矿, 磨矿分级, 磁选选别

Abstract: In order to test the operation effect of grinding and separation process of lean magnetite af⁃ ter the transformation of 3# series full-size wet pre-concentration process in Yanshan Iron Mine,the whole process was investigated and analyzed. By means of chemical composition,iron phase and particle size screening analysis,the ore properties,mineral types and contents in each process,monomer dissociation de⁃ gree and the loss trend of useful minerals,gangue minerals and metals in the process are analyzed,and the operation status of each process is comprehensively analyzed and diagnosed. From the perspective of the op⁃ eration effect of the overall process flow,the production status of the 3# series is normal,and the concentrate yield and quality indicators basically meet the design requirements;However,after the overflow of the elu⁃ triation machine returns to the original process through the scavenging concentrate,it will cause problems such as increased circulation,low classification efficiency of the first stage cyclone and anti-enrichment, and there is room for further improvement in technical and economic indicators.

Key words: magnetite, grinding and classification, magnetic separation