欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2023, Vol. 39 ›› Issue (01): 195-.

• 矿物加工工程 • 上一篇    下一篇

河南某白云石矿煅烧试验研究

李威1 邵世威2 邓晓珂1   

  1. 1. 河南省地质局地质灾害防治中心;2. 河南省地质矿产勘查开发局第一地质勘查院
  • 出版日期:2023-01-25 发布日期:2023-05-12

Experimental Study on Calcination of a Dolomite in Henan

LI Wei1 SHAO Shiwei2 DENG Xiaoke1   

  1. 1. The Geological Disaster Prevention Center,Henan Geological Bureau;2. The First Geological Explora⁃ tion Institute of Henan Geological and Mineral Exploration and Development Bureau
  • Online:2023-01-25 Published:2023-05-12

摘要: 为了查明河南某白云石矿煅烧后白云岩的灼减以及活性,针对白云岩在不同煅烧温度 和时间下产生的不同差异问题进行了煅烧试验研究。通过差热分析得到白云石的分解温度,白云石 煅烧温度及时间为1 100 ℃、90 min时,煅烧后的灼减与活性度达到最大,灼减为47.36%,活性度达 225.6 mL,煅烧后产品化学成分主要为MgO、CaO,含量分别为40.50%、55.68%;物质组成主要为石灰 石、方镁石,含量分别为54%、41%。试验结果表明:白云石的煅烧适宜温度为1 100~1 150 ℃,适宜时 间为30~90 min,主要物质组成为石灰石、方镁石。

关键词: 白云石, 煅烧制度, 煅烧温度, 活性度

Abstract: In order to find out the burning loss and activity of dolomite after calcination of a dolomite mine in Henan,the calcination test was carried out to study the different differences of dolomite at different calcination temperatures and time. The decomposition temperature of dolomite was obtained by differential thermal analysis. When the calcination temperature and time of dolomite were 1 100 ℃ and 90 min,the ignition loss and activity after calcination reached the maximum,the ignition loss was 47.36%,and the activ⁃ ity was 225.6 mL. The chemical composition of the calcined product was mainly MgO and CaO,and the content was 40.50% and 55.68%,respectively. The material composition is mainly limestone and peri⁃ clase,and the content is 54% and 41% respectively. The results show that the suitable calcination tempera⁃ ture of dolomite is 1 100~1 150 ℃,and the suitable time is 30~90 min. The main components are limestone and periclase.

Key words: dolomit, calcination system, calcination temperature, reactivity