基于Auto CAD 二次开发的露天矿DTM 曲面快速构建计算研究

现代矿业 ›› 2022, Vol. 38 ›› Issue (08): 238-.

基于Auto CAD 二次开发的露天矿DTM 曲面快速构建计算研究

范振华¹ 李角群^2，3 付信凯¹ 卢皎旭² 高松³ 程相琛²

1. 中钢集团山东富全矿业有限公司；2. 西安建筑科技大学资源工程学院； 3. 陕西省矿产资源综合利用工程技术研究中心

出版日期:2022-08-25 发布日期:2023-06-07
基金资助:
*国家自然科学基金项目（编号：Z20180205）。

Research on Rapid Surface Construction Technology of Open-pit DTM BASED ON AUTO CAD Secondary Development

FAN Zhenhua¹ LI Jiaoqun^2，3 FU Xinkai¹ LU Jiaoxu² GAO Song³ CHENG Xiangchen²

1. Sinosteel Shandong Fuquan Mining Co.，Ltd.；2. School of Resource Engineering， Xi'an University of Architecture and Technology；3. Shaanxi Province Mineral Resources Comprehensive Utilization Engineering Technology Research Center

Online:2022-08-25 Published:2023-06-07

摘要/Abstract

摘要： 在Auto CAD 平台下完成露天矿DTM曲面构建，采用三角剖分算法基于线框模型构建地表模型及二次境界模型，并求取它们的交线。以此交线剪切地表及二次境界线框模型，组成含有地形线的终了境界线框模型，实现三维可视化模型的建立。构建应用菜单，编制应用程序，最终实现露天矿终了境界中DTM曲面构建及其运算的程序化。本研究成果在降低误差的同时提高设计的精度和工作效率，对于露天矿终了境界设计图绘制具有重要的意义。

关键词: Auto CAD二次开发, 露天矿境界设计, DTM曲面构建, Delaunay 三角剖分算法

Abstract: The DTM surface construction of the open-pit mine was completed under the Auto CAD platform，and the surface model and the secondary boundary model were constructed based on the wire⁃ frame model by using the triangulation algorithm，and their intersection lines were obtained. Based on the intersection line shear surface and the secondary boundary line frame model，the final boundary line frame model with terrain line is formed，the establishment of three-dimensional visualization model is realized， Build application menus，compile application programs，and finally realize the programming of DTM sur⁃ face construction and operation in the finel realm of open-pit mines. It is of great significance to improve the accuracy and efficiency of design while reducing the error for drawing the final boundary design map of open-pit mines.

Key words: Auto CAD secondary development, open-pit boundary design, DTM surface construc? tion, Delaunay triangulation algorithm

范振华, 李角群, 付信凯, 卢皎旭, 高松, 程相琛. 基于Auto CAD 二次开发的露天矿DTM 曲面快速构建计算研究[J]. 现代矿业, 2022, 38(08): 238-.

FAN Zhenhua, LI Jiaoqun, FU Xinkai, LU Jiaoxu, GAO Song, CHENG Xiangchen. Research on Rapid Surface Construction Technology of Open-pit DTM BASED ON AUTO CAD Secondary Development[J]. Modern Mining, 2022, 38(08): 238-.

扫码分享