特种石墨生产关键技术研究

现代矿业 ›› 2022, Vol. 38 ›› Issue (08): 195-.

特种石墨生产关键技术研究

申保金^1，2李晓祥^1，2 汪伟^1，2 匡格平³ 李庆波^1，2 裴晓东^1，2

1. 中钢集团南京新材料研究院有限公司；2. 中钢天源股份有限公司；3. 北京宇航系统工程研究院

出版日期:2022-08-25 发布日期:2023-06-07

Research on Key Technology in Special Graphite Production

SHEN Baojin^1，2 LI Xiaoxiang^1，2 WANG Wei^1，2 KUANG Geping³ LI Qingbo^1，2 PEI Xiaodong^1，2

1. Sinosteel Nanjing Advanced Materials Research Institute Co.，Ltd；2. Sinosteel Tianyuan Co.，Ltd.； 3. Beijing Aerospace System Engineering Research Institute

Online:2022-08-25 Published:2023-06-07

摘要/Abstract

摘要： 为了获得特种石墨制品最优性能，试验研究了3 种特种石墨生产工艺对产品热膨胀系数、电阻率、抗折强度和抗压强度等性能的影响，并确定了“一浸两焙石墨化”最优石墨化升温制度。结果表明，升温程序2、最高温度2 810 ℃条件下，产品热学综合性能和机械综合性能达到最优；“一浸两焙二次石墨化”和“二浸三焙石墨化”工艺最终产品的密度、抗折强度、电阻率、热膨胀系数及各向同性等性能指标更大，即提高产品的机械综合性能，降低了热学综合性能。

关键词: 特种石墨, 石墨化, 升温速率, 石墨化温度

Abstract: In order to obtain the optimal properties of special graphite products，the effects of three kinds of special graphite production processes on the thermal expansion coefficient，resistivity，flexural strength and compressive strength of the products were studied experimentally，and the optimal graphitiza⁃ tion heating system of "one soaking，two baking and graphitization" was determined. The results showed that the thermal and mechanical properties of the product are the best under the condition of heating proce⁃ dure 2 and the maximum temperature of 2 810 ℃. The density，flexural strength，resistivity，thermal ex⁃ pansion coefficient and anisotropy of the final product of "one dip，two bake and two graphitization" and "two dip，three bake and graphitization" process are larger，that is，the mechanical properties of the prod⁃ uct are improved，but the thermal properties are reduced.

Key words: special graphite, graphitization, heating rate, graphitization temperature

申保金, 李晓祥, 汪伟, 匡格平, 李庆波, 裴晓东. 特种石墨生产关键技术研究[J]. 现代矿业, 2022, 38(08): 195-.

SHEN Baojin, LI Xiaoxiang, WANG Wei, KUANG Geping, LI Qingbo, PEI Xiaodong. Research on Key Technology in Special Graphite Production[J]. Modern Mining, 2022, 38(08): 195-.

扫码分享