欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2023, Vol. 39 ›› Issue (03): 171-174.

• 矿物加工工程 • 上一篇    下一篇

安徽某铜熔炼渣浮选选铜试验

王刚强   

  1. 铜陵有色股份天马山黄金矿业有限公司
  • 出版日期:2023-03-25 发布日期:2023-05-05

Flotation Test of Copper from a Copper Smelting Slag in Anhui Province

WANG Gangqiang   

  1. Tongling Nonferrous Shares Tianmashan Gold Mining Co.,Ltd.
  • Online:2023-03-25 Published:2023-05-05

摘要: 安徽某铜熔炼渣含铜1.64%,铜主要以硫化铜和单质铜的形式存在,铜矿物粒度整体偏 细,铜矿物集合体主要分布在-0.043 mm,为确定该熔炼渣回收铜资源的合适工艺,进行了浮选试验 研究。试验结果表明:采用阶段磨矿工艺,在一段磨矿细度-0.074 mm74.2%、二段磨矿细度-0.045 mm98.3% 的条件下,通过2 粗2 精3 扫浮选工艺流程,闭路试验获得了铜品位23.33%、铜回收率 86.36%的铜精矿,尾矿含铜0.239%的较好指标。

关键词: 铜熔炼渣, 磨矿, 浮选

Abstract: A copper smelting slag in Anhui contains 1.64% copper. Copper mainly exists in the form of copper sulfide and elemental copper. The particle size of copper minerals is generally fine,and the copper mineral aggregates are mainly distributed at -0.043 mm. In order to determine the appropriate process for recovering copper resources from the smelting slag,a flotation test was carried out. The test results show that under the condition of one-stage grinding fineness of -0.074mm 74.2% and two-stage grinding fineness of -0.045mm 98.3%,by stage grinding process,the copper concentrate with copper grade of 23.33% and copper recovery of 86.36% was obtained by closed-circuit test through two roughing,two cleaning and three scavenging flotation process. The tailings contain 0.239% copper.

Key words: copper smelting slag, grinding, flotation