欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2025, Vol. 41 ›› Issue (07): 92-95,100.

• 矿物加工工程 • 上一篇    下一篇

某高硫金矿提高选矿指标工艺试验

刘 慧 马鹏程 臧文优 王路平 豆 娜 王 苹   

  1. 山东国环固废创新科技中心有限公司
  • 出版日期:2025-07-25 发布日期:2025-08-26

Process Test of Improving Beneficiation Index of a High-sulfur Gold Mine

  1. Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.
  • Online:2025-07-25 Published:2025-08-26

摘要: 某金矿新采区矿石性质发生变化,探查为含硫3%以上的高硫金矿,金矿物主要以微细 粒包裹状态嵌布,与黄铁矿共生关系密切,与原浮选工艺不再适应。为提高选矿工艺指标,进行了常 规浮选工艺和再磨再选工艺选矿指标分析对比试验。试验结果表明:选用阶段磨浮工艺,一段磨矿 细度-0.074 mm80%,采用1粗2扫1精流程,二段精矿再磨细度-0.038 mm90%,采用2次精选流程,可 获得产率7.69%、金品位22.26 g/t、金回收率82.25%的金精矿,该工艺满足现场选矿指标要求。

关键词: 高硫金矿, 金精矿, 再磨再选, 选矿指标

Abstract: The ore properties of a new mining area of a gold mine have changed. Now,the high-sul‐ fur gold mine containing more than 3% sulfur is explored. The gold minerals are mainly embedded in fine particles,which are closely related to pyrite symbiosis and no longer adapt to the original flotation process. In order to improve the indexes of mineral processing technology,the comparative test of mineral process‐ ing indexes of conventional flotation process and regrinding and re-concentration process is carried out. The test results show that the gold concentrate with yield of 7.69%,gold grade of 22.26 g/t and gold recov‐ ery of 82.25% can be obtained by using stage grinding and flotation process,one stage grinding fineness of -0.074 mm 80%,one roughing,two scavenging and one cleaning process,two stage concentrate regrind‐ ing fineness of -0.038 mm 90%,and two cleaning processes. The process meets the requirements of on�site beneficiation indexes.

Key words: high-sulfur gold ore, gold concentrate, re-grinding and re-separation, beneficiation index