欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2025, Vol. 41 ›› Issue (07): 130-133.

• 矿物加工工程 • 上一篇    下一篇

辽宁某铁矿石选矿工艺试验

肖 轲1 汪劲刚2 汪 军3 江 河1 高双龙3 胡金栓3   

  1. 1. 江西铜业股份有限公司德兴铜矿;2. 中钢天源股份有限公司; 3. 中钢天源安徽智能装备股份有限公司
  • 出版日期:2025-07-25 发布日期:2025-08-26

Beneficiation Process Test of an Iron Ore in Liaoning

  1. 1. Dexing Copper Mine,Jiangxi Copper Co.,Ltd.; 2. Sinosteel New Materials Co.,Ltd.;3. Sinosteel New Materials Anhui Intelligent Equipment Co.,Ltd.
  • Online:2025-07-25 Published:2025-08-26

摘要: 辽宁某铁矿因采出矿石性质变化,导致选厂回收指标波动较大,尾矿跑尾严重。为了 探索合适的选矿工艺,降低尾矿金属损失率,针对该铁矿石开展了湿式预选、磨矿细度优化、磁场强 度探究等系统试验研究,并确定了适宜的工艺参数。试验结果表明:采用优化后的两段磨矿、四段磁 选工艺流程,可获得产率 38.47%、铁品位 63.25%、全铁回收率 79.09% 的精矿产品,整体选别指标较 好,为该铁矿石的高效开发利用提供了科学依据与技术支撑,对提升铁矿石资源利用率具有重要意 义。

关键词: 铁矿石, 球磨, 湿式磁选, 全流程试验

Abstract: Due to the change of ore properties,the recovery index of an iron mine in Liaoning fluctu‐ ates greatly,and the tailings run seriously.In order to explore a suitable beneficiation process and reduce the metal loss rate of tailings,systematic experimental studies such as wet pre-concentration,grinding fineness optimization,and magnetic separation field strength exploration are carried out for the iron ore,and appro‐ priate process parameters are determined. The test results show that the concentrate product with yield of 38.47%,iron grade of 63.25% and total iron recovery of 79.09% can be obtained by using the optimized two-stage grinding and four-stage magnetic separation process.The overall separation index is good,which provides scientific basis and technical support for the efficient development and utilization of the iron ore, and is of great significance to improve the utilization rate of iron ore resources.

Key words: iron ore, ball milling, wet magnetic separation, full process test