欢迎访问《现代矿业》杂志官方网站,今天是 分享到:
×

扫码分享

现代矿业 ›› 2022, Vol. 38 ›› Issue (10): 85-.

• 采矿工程 • 上一篇    下一篇

基于AHP-TOPSIS 综合评判的深部厚大矿体采矿方法优选

梁耀东1 高峰2 李新2 罗增武1 宋首洋1 黄世顶1   

  1. 1. 广西高峰矿业有限责任公司; 2. 中南大学资源与安全工程学院
  • 出版日期:2022-10-25 发布日期:2023-05-19
  • 基金资助:
    十三五国家重点研发计划课题(编号:2020YFC1909801)。

Selection of Mining Methods for Deep Thick Large Ore Based on AHP-TOPSIS Evaluation Model

LIANG Yaodong1 GAO Feng2 LI Xin2 LUO Zengwu1 SONG Shouyang1 HUANG Shiding1   

  1. 1. Guangxi Gaofeng Mining Co.,Ltd.; 2. School of Resources and Safety Engineering, Central South University
  • Online:2022-10-25 Published:2023-05-19

摘要: 针对高峰矿深部急倾斜厚大矿体开采对生产能力和生产效率提升的要求,开展了采 矿方案优选研究。首先建立了基于层次分析法(AHP)和逼近理想解(TOPSIS)的综合评判模型, 并根据矿体开采技术条件初选了3 种采矿方案。采用AHP-TOPSIS 模型,从技术、经济和安全3 个 方面选取共11 个指标进行综合评价,得出最优采矿方法为分段空场嗣后充填采矿法。

关键词: 采矿方法, 厚大矿体, AHP-TOPSIS 综合评判

Abstract: In view of the requirements for the improvement of production capacity and production effi⁃ ciency in the mining of deep steeply inclined thick orebody in Gaofeng Mine,the optimization of mining scheme was studied. Firstly,a comprehensive evaluation model based on AHP and TOPSIS is established, and three mining schemes are selected according to the technical conditions of orebody mining. Using AHP-TOPSIS model,11 indexes were selected from three aspects of technology,economy and safety for comprehensive evaluation,and the optimal mining method was segmented open stope subsequent filling mining method.

Key words: mining method, thick ore body, AHP-TOPSIS comprehensive evaluation