欢迎访问《现代矿业》杂志官方网站，今天是
分享到：
×
现代矿业 ›› 2024, Vol. 40 ›› Issue (06): 189-.
同忻矿 5210运输顺槽掘进期间 SSJ-1000型带式输送机频繁出现跑偏现象，导致带式
输送机撕带、断带事故率高，撒煤量严重等问题。通过分析带式输送机跑偏机理以及跑偏后产生的
危害，提出了“纠偏托辊+电控纠偏装置”为一体的综合纠偏系统。通过现场应用得出，新型纠偏系统
投入使用后，带式输送机跑偏事故率降低至 5%以下，输送机维修费用减少了 24.7万元，有效解决了
带式输送机纠偏难度大、跑偏故障率高、使用寿命短等技术难题，取得了显著应用成效。
The frequent deviation of SSJ-1000 belt conveyor was occurred during the driving of 5210
in Tongxin Mine，which led to the high rate of belt tearing and belt breaking and the serious amount of coal
spreading. By analyzing the deviation mechanism of belt conveyor and the harm caused by deviation，a com⁃
prehensive deviation correction system of "roller correction + electronic control correction device" was put
forward. According to the field application effect，after the new correction system was put into use，the belt
conveyor deviation accident rate was reduced to less than 5%，the conveyor maintenance cost was reduced
by 247 000 yuan，and the technical problems such as the difficulty of belt conveyor deviation correction，
high conveyor deviation failure rate and short conveyor service life were effectively solved，and remarkable
application results were achieved.
摘要：
皖公网安备34050402000109号 皖ICP备05002078号-6