现代矿业 ›› 2011, Vol. 27 ›› Issue (12): 15-16.
• 采选工程 • 上一篇 下一篇
崔启晨1,李广涛2,王廷国2,钱年奕2
出版日期:
发布日期:
Cui Qichen1,Li Guangtao2,Wang Tingguo2,Qian Nianyi2
Online:
Published:
摘要: 以云南某地硫化铜矿为研究对象。对该矿进行矿石分析,该矿含铜0.68%,并且主要是以硫化物形式存在。采用1粗3精3扫的浮选流程,得到含铜20.52%,回收率90.83%的铜精矿。为下一步该矿的开发奠定了坚实的基础。
关键词: 硫化铜矿, 浮选, 铜精矿
Abstract: Took a copper sulphide ore in Yunnan as the research object. Analyzed and found the ore copper content was 0.68% and mainly existed in the form of sulfide. Copper concentrate with copper content 20.52% and recovery rate 90.83% were obtained by adopting flotation process of one roughing three times reconcentrate three times scavenging. Laid a solid foundation for the further development of this ore.
Key words: Copper sulphide ore, Flotation, Copper concentrate
崔启晨, 李广涛, 王廷国, 钱年奕. 云南某硫化铜矿选矿试验研究[J]. 现代矿业, 2011, 27(12): 15-16.
CUI Qi-Chen, LI Guang-Tao, WANG Ting-Guo, QIAN Nian-Yi. Experimental Study on Mineral Processing of A Copper Sulphide Ore in Yunnan Province[J]. Modern Mining, 2011, 27(12): 15-16.
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.xdky.net/CN/
https://www.xdky.net/CN/Y2011/V27/I12/15