欢迎访问《现代矿业》杂志官方网站,今天是 分享到:

现代矿业 ›› 2018, Vol. 34 ›› Issue (09): 11-15.

• 有色金属矿选矿 • 上一篇    下一篇

云南某铜钼多金属矿选矿工艺试验

和翠英,王国强   

  1. 云南迪庆有色金属有限责任公司
  • 出版日期:2018-09-25 发布日期:2018-10-16

Experiment on Mineral Processing of a Copper-molybdenum Deposit in Yunnan Province

He Cuiying,Wang Guoqiang   

  1. Yunnan Diqing Nonferrous Metal Co.,Ltd.
  • Online:2018-09-25 Published:2018-10-16

摘要: 为合理回收云南某含铜、钼平均品位分别为0.52%、0.011%的低品位难分选铜钼多金属矿,在矿石性质研究的基础上,进行了选矿工艺试验研究。试验结果表明:在磨矿细度为-0.074 mm 57.81%、捕收剂OL-2用量为80 g/t、抑制剂TL-1用量为300 g/t的最优条件下,铜钼混和粗选通过粗磨抛尾、粗精矿再磨、1粗2精3扫;在浮选调整剂水玻璃用量为1 204.7 g/t、氟硅酸钠用量为680.2 g/t的最佳条件下,铜钼分离浮选采用1粗4精1扫的选矿工艺流程;最终获得了铜品位为25.85%、铜回收率为87.729%、含钼0.033%的铜精矿,钼品位为46.35%、钼回收率为76.35%的钼精矿;试验综合指标较好,为该铜矿高效开发利用铜、钼资源提供了科学依据及技术支撑。

关键词: 铜钼多金属矿, 磨矿细度, 混合浮选, 分离浮选

Abstract: The valuable elements such as copper,molybdenum are occurred in the researched copper deposit with 0.52% and 0.011%,which characterized by low grade and difficult separation.For reasonable recovery of copper,molybdenum of Cu-Mo polymetallic deposit in Yunnan Province,the benefication process experiment was conducted,based on the ore properties.Experimental results show that the grinding fineness of 57.81% -0.074 mm,collector dosage (OL-2) 80 g/t,lime dosage (TL-1) of 300 g/t in cleaning optimal conditions,the roughing experiment-process of coarse grinding-discarding tailing,regrinding of rough concentrate,once roughing,twice concentrate and three-times molybdenum cleaning has determined,by using the sodium sulfide (1 204.7 g/t) as flotation refulator,sodium fluosilicate (680.2 g/t) as combined depressant.According to the separation flotation of once roughing,four-times concentrate and once cleaning,the copper concentrate with copper grade of 25.85%,recovery of 87.729% and molybdenum grade of 0.033% has got.In addition,the molybdenum concentrate with grade of 46.35%,recovery of 76.35% has obtained.Finally,this author hold that the well comprehensive index can provides the scientific basis and technology support for effective development and utilization of copper-molybdenum ore in Pulang copper deposit.

Key words: Copper-molybdenum ore, Grinding fineness, Bulk flotation, Separation flotation