欢迎访问《现代矿业》杂志官方网站,今天是 分享到:

现代矿业 ›› 2014, Vol. 28 ›› Issue (03): 11-13+32.

• 采矿·矿物加工 • 上一篇    下一篇

钟山铁矿选矿工艺研究

朱德馨   

  1. 烟台金建冶金科技有限公司
  • 出版日期:2014-03-15 发布日期:2014-05-20

Beneficiation Experiments of Zhongshan Iron Ore

Zhu Dexin   

  1. Yantai Jinjian Metallurgy Technology Co., Ltd.
  • Online:2014-03-15 Published:2014-05-20

摘要: 采用高压辊磨—粗粒湿式磁选抛尾—阶段磨矿、阶段弱磁工艺流程对钟山磁铁矿进行了选别试验。结果表明,高压辊磨产品(-3 mm)经湿式预选后可提前抛出产率50.05%、全铁品位8.33%的尾矿,入磨矿石铁品位由23.67%提高到39.18%,为降低企业生产成本提供了技术支撑;预选精矿经阶段磨矿、阶段弱磁选可获得铁品位65.13%、铁回收率61.48%、磁性铁回收率98.65%的最终铁精矿产品。

关键词: 磁铁矿, 高压辊磨, 粗粒湿式磁选, 阶段磨选

Abstract: Beneficiation tests on Zhongshan iron ore was carried out by the process of high pressure roller mill-wet magnetic separation for coarse ores-stage grinding and stage low intensity magnetic separation. The results showed that, tailings with yield rate of 50.05% and iron grade of 8.33% will discarded after wet magnetic separation for high pressure roller mill products, iron grade of feed for grinding increased from 23.67% to 39.18%, providing technical support for reduce the production cost. Iron concentrate with iron grade of 65.13%, iron recovery of 61.48% and magnetic iron recovery of 98.65% could achieved by stage grinding-stage low magnetic separation for iron concentrate of pre-concentration.

Key words: Magnetite, High pressure roller mill, Wet magnetic separation for coarse ores, Stage grinding and stage concentration