Ca、Mg、Al、Si含量对湘钢铁矿烧结过程的影响

现代矿业 ›› 2014, Vol. 30 ›› Issue (02): 25-28.

Ca、Mg、Al、Si含量对湘钢铁矿烧结过程的影响

文小平

湖南华菱湘潭钢铁有限公司炼铁厂

出版日期:2014-02-15 发布日期:2014-04-28

Ca, Mg, Al, Si Content on the Sintering Process of Iron Ore from Xiang-steel

Wen Xiaoping

Ironworks， Hunan Valin Xiangtan Iron & Steel Co. Ltd.

Online:2014-02-15 Published:2014-04-28

摘要/Abstract

摘要： 湘钢为了适应战略发展要求，降低生产成本，烧结用含铁原料中配加了较多的铁品位低、铝硅含量高的低品质铁矿，为采用合理的配矿技术，减少对烧结过程和高炉冶炼过程产生的不利影响，以湘钢烧结现场原料为对象，采用烧结杯试验，重点考查了CaO、MgO、Al2O3、SiO2含量对烧结各指标的影响规律，为湘钢低品质矿的合理配矿提供了技术依据。

关键词: 铁矿烧结, 碱度, 成品率, 转鼓强度

Abstract: In order to adapt to the requirements of Xiang-steel development strategic, reducing production costs, raw material contain iron for sintering was merged with some additional low-quality iron ore with low-grade, high aluminum and silicon content. In order to find a reasonable technology of mine merge, reducing disadvantage causing by sintering process and blast furnace smelting process, CaO, MgO, Al2O3, SiO2 content on various indicators during sintering was studied through sintering test by using on-site sintering raw material from Xiang-steel, which provide technical basis for reasonable mine merge of low-quality iron ore from Xiang-steel.

Key words: Iron ore sintering, Alkalinity, Yield of finished, Twmbler strergth

文小平. Ca、Mg、Al、Si含量对湘钢铁矿烧结过程的影响[J]. 现代矿业, 2014, 30(02): 25-28.

WEN Xiao-Ping. Ca, Mg, Al, Si Content on the Sintering Process of Iron Ore from Xiang-steel[J]. Modern Mining, 2014, 30(02): 25-28.

[1]	衡旭文, 杨志勇. 某石灰石矿开采及加工工艺优化[J]. 现代矿业, 2013, 29(05): 133-135.
[2]	王军宏, 吴扣荣. 泗洲选矿厂处理难磨矿的生产实践[J]. 现代矿业, 2012, 28(05): 134-135.
[3]	黄有成, 赵礼兵. 无机抑制剂在低碱度铅锌硫分离中的作用研究[J]. 现代矿业, 2012, 28(01): 23-29+46.
[4]	李建华, 康健, 成富全. 结矿碱度波动影响因素探讨[J]. 现代矿业, 2009, 25(6): 98-100.
[5]	蔡振波, 刘亮, 吕炳军. 江铜集团某铜矿低碱度铜硫分离工艺研究[J]. 现代矿业, 2009, 25(3): 97-99.