欢迎访问《现代矿业》杂志官方网站,今天是 分享到:

现代矿业 ›› 2012, Vol. 28 ›› Issue (08): 14-17.

• 采选工程 • 上一篇    下一篇

高硫易自燃矿床开采工艺研究

佟磊1,肖益盖2,3,焦鹏1   

  1. 1.南京银茂铅锌矿业有限公司;2.中钢集团马鞍山矿山研究院有限公司;3.金属矿山安全与健康国家重点实验室
  • 出版日期:2012-08-15 发布日期:2012-08-29

Study of Mining Technology of High Sulfur Easy Self-ignition Deposit

Tong Lei1,Xiao Yigai2,3,Jiao Peng1   

  1. 1.Nanjing Yinmao Lead-Zinc Mine Co.Ltd;2.Sinosteel Maanshan Institute of Mining Research Co.,Ltd;3.State Key Laboratory for Safety and Health of Metal Mine
  • Online:2012-08-15 Published:2012-08-29

摘要: 通过对矿床开采技术条件、矿石高硫自燃的特点进行研究,针对南京栖霞山铅锌矿-375 m中段高硫自燃封闭908、909采场的恢复开采,提出高硫采场的回采工艺,选择上向水平分层充填法进行回采,解决高硫采场开采时的自燃问题,从而提高资源利用率,实现了对矿产资源的保护性开采。  

关键词: 高硫矿床, 自燃, 资源利用率, 上向水平分层回采

Abstract: Through the study of technical condition of deposit mining and high sulfur and easy self-ignition characteristics of ore, aiming at the restore exploitation of -375 m middle part closed 908,909 stope of Nanjing Qixiashan Lead-zinc mine because of high sulfur self-ignition, mining technology of high sulfur stope were raised, chose upward horizontal sublevel filling method in mining to solve the self-ignition problem during high sulfur stope mining, so the resources utilization ratio could improved and protective exploitation of mineral resources realized.

Key words: High-sulphur deposit, Self-ignition, Utilization ratio of resources, Upward horizontal sublevel mining