欢迎访问《现代矿业》杂志官方网站,今天是 分享到:

现代矿业 ›› 2014, Vol. 30 ›› Issue (09): 18-20.

• 采矿工程 • 上一篇    下一篇

夏店煤矿综采工作面矿压显现规律模拟

陈文云   

  1. 同煤集团晋华宫煤矿
  • 出版日期:2014-09-15 发布日期:2016-10-11

Simulation on the Law of Mine Pressure Appearance of the Comprehensive Mechanized Working Face in Xiadian Coal Mine

Chen Wenyun   

  1. Jinhuagong Coal Mine,Datong Coal Mine Group
  • Online:2014-09-15 Published:2016-10-11

摘要: 以夏店煤矿3111综采工作面为研究背景,采用数值模拟手段对工作面矿压规律进行了研究,得出坚硬顶板条件下采场上覆岩层的运动规律、采场矿压的基本参数等;当工作面未切眼放顶推进到50 m时,岩层整体破坏范围很小,顶板不会整体垮落;当工作面切眼放顶,工作面推进到30 m时,细砂岩岩层与工作面相交处的区域破坏基本上贯穿了整个细砂岩层,工作面初次来压步距约30 m左右。为工作面回采加强顶板管理提供了依据。

关键词: 综放开采, 矿压显现, 数值模拟, 顶板

Abstract: Taking the 3111 comprehensive mechanized working face in Xiadian coal mine as an research object,the movement law of stope overburden and the basic parameters of stope pressure under the condition of hard roof are obtained by simulating on mine pressure regularity of mining face.When the not cut caving of working face advance to 50 m,the destruction scope of whole rocks is small,so,the whole roof is not caving.When the cut caving of working face advance to 30 m,the regional destruction of the intersect of fine sandstone strata and working face throughout the whole of the fine sand layers.The first pressure step distance is about 30 m.The above research results provide the basis for strengthening the management of roof during the working face mining.

Key words: Fully-mechanized caving mining, Mine pressure, Numerical simulation, Roof